| High -Speed Compact Modular Mounter RX-7R | | | (P16S×P16S head） | (P16S×P8*1 head) | (P8×P8*1 head) | Board
size | Single lane conveyer | 50×50～510mm*2*3×450mm | Single lane conveyer
Single lane mode | 50×50～510mm*2*3×450mm | Single lane conveyer
Dual lane mode | 50×50～510mm*2*3×250mm | | Component height | 3mm | 3mm(P16S head） | 10.5mm | | 10.5mm（P8 head） | | Component size | 03015*4～□5mm | 03015*4～□5mm
（P16Sノ head） | 0603～□25mm | 0603～□25mm
（P8 head） | Placement speed
(Optimum） | Chip | 75,000 CPH | 54,900 CPH | 34,800 CPH | | IC | – | 6,400 CPH*3 | 12,800 CPH | Placement
accuracy | Chip | ±0.04mm(Cpk≧1) | | IC | – | ±0.04mm | | Feeder capacity | Up to 56*6 | | Power supply | 3 phase AC200V、220Ｖ-430V*7 | | Apparent power | 2.3kVA | | Operating air pressure | 0.5±0.05MPa | | Air consumption (standard) | 20L/分ANR（during normal operation） | | Machine dimensions (W x D x H)*9 | 998×1,895×1,530mm | 998×1,895×1,530mm*8 | | Mass (approximately) | about 1,820kg*10 | *1 Contact sales for more details
*2 The BOC, BAD mark, and 2D code can be recognized when the board size X-axis is between 50 mm and 350 mm.
*3 In long board mode.(Two PCBs up to 420mm can be produced simultaneously)
*4 Contact sales for details
*5 Using P8 head
*6 Using RF04AS or RF08AS feeders
*7 Optional transformer required for 220V – 430V
*8 P8 head requires 123mm additional space on the front for the feeder bank
*9 Display and signal light not included
*10 Using P16S x P16S head configuration, dual lane with trolleys |
;)
