K-1800 PNEUMATIC STENCIL CLEANING MACHINE [MÁY RỬA KHUÔN IN METAL MASK K-1800 K1800]
The K-1800 stencil cleaner using solvent or water-based liquid (ex: Kyzen L5611 / L5611D) has proved with excellent performance and low-cost by more than 300 customers world-wide. It can also clean misprint boards and scarper with optional fixtures.
Features Used for cleaning solder paste, glue,etc. Completely pneumatic operating without fire risk. Cleaning in closed-loop which make lowest cleaning solvent consumption Equipped with high precision tri-filtering system Special design on air exhaust can reduce cleaning chemistry consumption Good adaptability for compressor air(only 0.45Mpa could run ） Cleaning and drying process can be easily control with one-button operation. Stainless steel canbinet with good reliability and can resisit any hurt by acid and alkali cleaning chemistry. Technical Data: Stencil Size：Max 750mm(L) ×750mm(W) × 40mm(H) Liquid Tank Capability：Max 40L Liquid Usage Amount：35L Operating Method：360°Whirl/Ejection for cleaning; High air pressure for drying Clean Time Setting：2-5 Minutes Dry Time Setting：2-5 Minutes Compressor Air：0.45Mpa ～ 0.7Mpa Air Consumption：400-600L/Min Dross Filtering：Three class filter system 1 Filter:10μm(Filtering impurities and Labelling) 2 Filter：5μm (Filtering small particles and solder paste) 3 Filter：1μm ( Filtering small particles and rosin) Outlet Size：Φ124(W)×50mm(H) Net Weight：220Kg Machine Size：1000mm(L) ×640mm(W) × 1660mm(H)